Fast delivery within 72 Hours
Intelligent Lighting Controller
$486.62
Intelligent Lighting Controller (ILC) is an electronic control system specifically designed for switching and dimming lighting loads in experimental aircraft. ILC provides independent switching of four (4) lighting circuits which may be used to control landing lights, taxi lights, strobe lights and navigation lights. The lighting loads can be any combination of incandescent, LED, or HID. Additionally, ILC includes three (3) independently controlled dimming circuits which may be used to control incandescent or LED instrument and cockpit/cabin lights.
Model:
- Intelligent Lighting Controller (ILC-4CH) – $423.50
Frequently Bought Together
Why Pilots Trust AVIA Avionics
Enjoy fast UPS, USPS, or DHL delivery on qualifying orders.
We use DHL or UPS for worldwide shipments. Some shipments may require special processing.
Sales tax only applies where required by law.
Strong customer service with fast response times.
Description
Intelligent Lighting Controller (ILC) is an electronic controller designed specifically to operate the lighting circuits used in homebuilt or experimental aircraft. ILC provides control of up to four (4) lighting circuits and each circuit can control up to 10 amps of load. ILC also includes three (3) dimming circuits for instrument and cockpit/cabin lights. Each dimming circuit is independently powered and controlled and can control incandescent or LED lighting up to 1 amp. ILC also provides a wig-wag function between two of the lighting circuits, such as landing and taxi lights for increased aircraft visibility.
ILC operates from 10-30 volts DC.
| Weight | 1.4 lbs |
| Dimensions | 9 × 6 × 3 in |
Intelligent Lighting Controller
Non-certified
| ILC-4CH |
Input Voltage: | 10 – 30 volts DC |
Outputs: | 4 switched circuits rated at 10 amps each |
Dimmers: | True DC:DC converter with full power filtering and regulated 2-12 volt outputs |
Inputs: | All switch inputs are low current closures to voltage |
Wig-Wag: | 150 cycles/minute between channel 1 & 2 |
Wiring: | Standard 15-pin dsub connector (male on controller for connection to switching panel |
Enclosure: | Overall dimensions 4.7” x 3.7” x 1.2” |
Weight: | 1 lb. |
For Experimental Aircraft ONLY, not TSO’d
Instruction Manuals
You may also like
